Three Common Problems in The Digital Inkjet Printing-----Do You Know How to Solve it ?

  Today is a snow day. How about you? If your weather is also snowy, take care of the slippery. Nowadays, with the development of the digital inkjet printing , this printing method is getting more and more popular in the world. People can use it for the fabric printing, paper printing or use it for the advertisement and banners produce. 
  However, The process of developing progress is the process of finding the problem. In our daily usage of the digital inkjet printings we must meet many different problems. Today in order to help your printing getting a better effect I will analysis three main problems in the printing process. 

Sticky of the Paper
  This problem is mainly reflected in the process of printing and happened on the sticky sublimation paper. When you printing your inkjet printer may feed two sheet or more papers st a time, this may cause your printing machine can't work normally and shut down.There are two main reasons that may cause this problem. 
  Firstly,  It is because your sticky sublimation paper is to tacky or wet. This problem is easy to be solved. Put your sublimation paper on the radiator and dry your paper. But take care don't put it for a long time, or your sublimation paper may be not sticky than what you need.
  Secondly, the sublimation paper you bought mostly stored in the cartons, sometimes if you import it from other countries, your sublimation paper may be pressed for a long time. The solution is holding both ends of the paper with both hands back and forth rubbing before you put it onto the inkjet printer, so that each piece of paper activities, so that the paper formed a neat bevel, so beveled down into the tray, so that will not Re-emergence of sticky sublimation paper phenomenon.

Jam Problem
  This problem always happen on the desktop A3,A4 sublimation inkjet printer. Many times the jam is due to improper use. After a paper jam, turn the printer off and decide whether to pull the paper from the outside or inside depending on the jammed paper. Be especially careful at this time to prevent the pieces of paper from remaining inside the printer.

No Feeding of The Sublimation Paper
  The general performance of the light to hear the sand wheel into the sublimation paper, that is, can not eat into the paper, causing the computer to prompt the printer out of paper and stop printing. I believe many users have encountered such problems.
  The main reason for this problem is that the room is too dry. The dryness of the paper will weaken the friction between the paper feed wheel and the paper so as to slippery and eat without feeding paper. The only way to solve this problem is to increase the humidity of the room, but it must be well controlled. Otherwise, the previous problem will be caused. There is to pay special attention to, do not let the printer near the radiator, not to direct the heater directly on the printer, especially the kind of quartz tube direct-type electric heater, so that in addition to causing such problems do not feed, Will make the inkjet head dry knot, resulting in can not print.

  Okay, These all above are my share about three common problems when use the digital inkjet printer. Each problem is related to the sublimation paper. So sometime have a good choice with both the sublimation paper and digital inkjet printer is very important. Of course if you have any needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Whatsapp:+8618752006819
Website: www.feiyuepaper.com
Facebook: Fei Yue Paper Industrial Co.,Ltd
Email:zeo@feiyuepaper.com