Nozzle of Your Desktop Inkjet Printer-----Do you Know how to Maintain?

  Happy new year, the new 2018 is coming. Is it snowing in your hometown? I seems going yo snow in my city tomorrow. I am so excited about this. I have just finished my three days new year holidays and back to work. Then in the New Year's first article I will share you some tips about how to maintain and clean the print head of your desktop digital sublimation printer in the different situations. Please read the following and hope my article can attract you.

Initial Maintain after Installation
  1. In order to make the digital inkjet printer nozzle into the best operating state, the equipment began to undertake the production business before, please use 1 to 2 days to do most of the most possible print some pictures, the picture is best CMYK 4 colors are used, and in the screen The two sides have to add C, M, Y, K 4 color bar to ensure that the four nozzles are always in the inkjet state, just like the car just bought back to run the same, the better run, the machine later use more smoothly
  2.Inkjet is best to the most right side of the cleaning station moisturizing sponge with its bracket together with the removal.

Maintain And Cleaning after The Daily Work
  After all the print jobs are completed every day, to keep the digital inkjet printer nozzle in the best working condition and to avoid clogging the nozzle due to solvent ink evaporation, keep the equipment overnight after the nozzle is maintained as follows.
  1. turn off the device power.
  2. first with a special cleaning solution will be moisturizing sponge clean, and then pour the liquid on the sponge to soak it.
  3. the nose back to the right of the cleaning station and the nozzle and moisturizing sponge close together.
  4. keep this state so that the device overnight.

Slightly Block of The Print Head
   In the inkjet process found a slight jam phenomenon after the digital inkjet printer nozzle should not hesitate to suspend the print job by PAUSE key, and then use a vacuum cleaner or manual air pump to spray the nozzle from the nozzle for cleaning, after cleaning must be squeezed with plastic Press the bottle to spray some of the cleaning solution on the nozzle surface to remove the residual ink.
Attention
  1. Do not use excessive force when using manual air pump, otherwise it will damage the nozzle due to excessive pressure.
  2.  Timely and decisive and thorough handling of the nozzle slightly blocked for the long time in the printing process to maintain the best working condition of the nozzle is very important!
  3. In addition, it is necessary to carefully check the print head and find the reasons for nozzle clogging.

Frequent Block of The Print Head
  1. Press the PAUSE button to pause the inkjet job firstly , and then press the PURGE button to move the nose to the leftmost cleaning position.
  2. keep the device power is turned on, the vice tank connected to the nose control panel on the liquid level sensor signal line all pulled out.
  3. The nozzle on the ink tube (from the vice tank) and then use a glass syringe to extract a special cleaning solution cleaning nozzle, the method: each with 40ml of cleaning fluid, every 10 minutes, a total of 3 to 4 times The
  4. After the re-plug the ink tube and liquid level sensor signal line, and then continue to suspend the previous print job.

  Okay, These all above are my share about how to maintain and cleaning your desktop digital inkjet printer print head. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you and best wished for you in the new year 2018. Thank for your reading.




Whatsapp:+8618752006819
Website: www.heatsub.com
Facebook: Fei Yue Paper Industrial Co.,Ltd
Email: zeo@feiyuepaper.com