显示标签为“UV printing”的博文。显示所有博文
显示标签为“UV printing”的博文。显示所有博文

2018年3月2日星期五

Take Care of The Factors When Operate the UV Printer

  Hi, Nice to see you. How are you today? It is always rainy in Nanjing, China. But the temperature is getting more and more warm now. Nowadays, apart the sublimation printing, the UV printing is also very popular in the world now. It can also help us print the patterns with vivid and brilliant color. While do you know what factors should you take care when operate your UV printer? Read the following and I will share you more.

1.Brute force adjustment print head.
  Do not use outside force to adjust nozzle position without regulation. Do not use brute force, whether changing or lightly adjusting nozzles. Please follow the instructions carefully.
2.Ignore the work ground line.
  UV flatbed printer is affected by static electricity very much. It is necessary to check the connection of ground line regularly and sprinkle a little salt water around the ground.
3. Random switching circuit.
  Install and remove the UV flatbed printer circuit, without turning off the power.This behavior can damage the life of each system, endanger the nozzle.
4.Cleaning without turn off the power.
  Pay attention to protecting the circuit board and other internal systems, and turn off the power when cleaning, and be careful not to touch the circuit board and other internal systems.

5.Use no inspection cleaning liquid.
  Clean the nozzle with an unclean liquid solution. Print head nozzle are very susceptible to contamination and wear, So please use the manufacturer specified product and quality inspection clearance product to clean nozzle.
6.High pressure cleaning nozzle.
  If the nozzle is slightly blocked, it is recommended to use a vacuum cleaner to wash out the dust, and then fine cleaning, do not use high pressure to clean the nozzle.
7.Soak the nozzle for cleaning.
  Although the to put the nozzle into cleaning solution for a long time can be more effective and clear stains, but the cleaning fluid has a certain corrosive, if the time more than 48 hours, the nozzle itself will be affected.Therefore, generally only take the appropriate time for cleaning the print head.
8. Ultrasonic cleaning nozzle.
  Do not long time using ultrasonic cleaning machine cleaning nozzle.In fact, if you usually pay attention to the maintenance of the nozzle, then no need for ultrasonic cleaning. Ultrasound can cause undesirable effects on the nozzle.But if the blockage is serious, need to use ultrasonic cleaning, then only cleaning time up to 3 minutes.If there is no cleaning at all, please wait for the nozzle to cool naturally to the normal state during the second cleaning.
9. Mix the ink at will.
  Do not arbitrarily raise different batches of ink, or use the bad quality ink, cleaning fluid. Two different configurations of ink mixing will change the ink color and quality, and will affect the printing effect and plug the nozzle.


  Okay, These all above are my share about the factors that you should better take care when operate your UV printer. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Nanjing Feiyue paper Industrial Co.,ltd
www.feiyuepaper.com
Facebook: Fei Yue Paper Industrial Co.,Ltd
Whatsapp:+8618752006819
Skype:+8618752006819

2017年12月19日星期二

Do You Know Which Nozzle is Best for The UV Printer And How to Install It?

  UV printing is a new technology in the digital inkjet printing industry. Widely use for advertisement printing like outdoor advertisement printing and indoor advertisement printing. Same as the sublimation printing, the print head is also a very important accessory for the UV printer. While do you know what print head is suited for the UV printer? And in order to let it have a best printing effect how to install it in a right way? I will share you in the following articles. Keep reading and know more.


Konica nozzle
  Konica nozzle, a recently introduced Japanese brand whose first image-based company was involved in the production of piezoelectric sprinklers, has also been successful at hardware facilities, including the Konica Minolta 512 sprinkler and 256 sprinklers.


Polaris nozzle
  The American Polaris Spray Head is a hyperspectral PQ-512/15 with a wide range of portrayed utility inkjet print heads for industrial and commercial print scale resolutions up to 1000 dpi.


Ricoh nozzle
  Ricoh acquired Hitachi's nozzle technology research and development department, Hitachi had two nozzles used well, HITACHI 256 I and HITACHI 256 II, VUTEK5300 and VUTEK3300, these two machines each use 16 HITACHI 256 I nozzles, HITACHI 256 II This nozzle is mainly used in the HP Scitex: Idanit, Pressjet machines, HP scitex Pressjet and HP tuberjet 83 used 150 HITACHI 256 II nozzle, the record seems to have not been broken by now.

  These all above are three print head that most suitable for the UV printing I suggest you. After the introduction of the print head, next I will share you how to install the UV print head in a right way.
  1. To prevent nozzle clogging, you are strongly advised to install print head in a clean environment.
  2. To avoid electrostatic damage to the nozzle clip, please install print heads in an environment with static protection.
  3. To avoid damaging the nozzle face, do not impact or directly touch with the nozzle face by hand.
  4. Protect the print head cable from scratching or cutting off by external forces.
  5. To ensure print accuracy, control the flatness of the nozzle mounting surface within 10 microns.
  6. When installing UV print head, the positioning bolt must be fully embedded in the installation hole to prevent print head tilt installation. 
  7. In order to avoid excessive external force applied to the nozzle, please control torque at about 0.63n nanometer when fixing the print head.
  8. To avoid damage to the ink supply port, do not apply force when installing or removing the ink supply hose.
  9. Don’t live insertion or pull out of print head cable, and pay attention that print cable don’t not diagonal insert, in order to avoid nozzle damage caused by bad contact.


  Okay, These all above are my share about the print head that most suitable for the UV printer and some ways about how to install them in a right way. If you have any other needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Nanjing Feiyue paper Industrial Co.,ltd
www.heatsub.com
Facebook: Zeo(章江徽)
Whatsapp:+8618752006819
Skype:+8618752006819

What is Epson 4720 Printhead? It Can Replace 5113 Print Nozzle?

Hello, nice to see you again, my dear friends. It will rainy in Nanjing, the sky is dack, wind is heavy. Now I will tell you the topic is a...