How Can We Maintain Our Print Head When Temperature is Getting Cold ?

  Hi, Nice to see you. In China, the summer has passed and the weather is getting colder and colder. When the season changes people also need to change their wearings. Same to this,  when the weather getting cold we should also pay attention to our digital inkjet printer. So as a most important part of the digital inkjet printer, do you know how to maintain the print head when temperature is getting cold.  Then I will share you about some tips that maintain your print head in the cold temperature. Read the following and get to know more. 

1.The temperature below 10℃

   The printer will appear blurry ghosting phenomenon, which is made virtual and ink print head caused by poor fluency.

Ways: open heating or heat lamp to keep the ink flowing(15℃~35℃). The print blurred, with a hairdryer blowing print head (1-2) minutes,blowing position in the print head side, which is encoded by side as shown in the print head,even blowing about can be solved.

2.Before the holidays to clean ink stack
  Comprising: a blade, ink around the ink pad, ink mud clean;bearing,track,on a small amount of gear oil or lubricants. Done more than you can make a test strip, no problem to put around the bottom of the ink print head are clean, and let the print head back to the warehouse with the ink-pad overlap,you can shut down!

3.After holiday back not the first time boot.
  Because inside the ink tube and print head ink may have icing, then we want to raise the room temperature to about 20℃ degrees, put 2-3 hours, and then observe the status of the ink tube and print head, if then not necessary,place a litter longer time, you want the job inside the ink is completely thawed, then duct blowing about sprinklers.

Focus: After thawing ink to stand for 24 hours in order not to affect the print ( fluency in 15 celsius to 35 degrees celsius).

  These all above are my share about the tips that you should pay attention to about how to maintain your print head when temperature is getting cold. We are a professional sublimation digital printing and transferring material manufacturer in China. So if you have any needs or questions welcome to contact us at any time. We will provide you with the best quality product and service. Hope my article can be useful to you. Thank you for your reading.




Nanjing Feiyue Digital Technology Co.,ltd
www.heatsub.com
Facebook: Zeo
Whatsapp:+8618752006819
Skype：+8618752006819